Here comes the new product!
Product functions/operation instructions
1 Connect the adapter. After the screen blinks three times, it enters standby state and displays OFF state."2 Power button: long press for 1.5 seconds to start/shut down the machine. After starting up, the display screen will display the flash number icon, the gear icon, and the machine inside
One of the blowers started working. Short press shift/shift, 1-5, cycle through.
3 Trigger button: the default manual flash mode is when the machine starts up. Press the button to flash once.
"4 Cooling button: After startup, there is no cooling by default. Press the cooling button to enable/disable the cooling mode, and the cooling icon is displayed on the screen
Turn on/off. Hold down for 2S to enter/exit the automatic flash mode, and the icon of the automatic light mode is on/off on the display screen
Off, slide to change position, flash continuous. "
"5 Touch sensing: ensure that the lamp holder is 90° vertical close to the skin, and the icon of the number of flashes flashes on the display screen. In order to detect skin,
Long bright indicates no skin detected.
6 Delay shutdown: after the shutdown, the display screen displays 09 S countdown to 01 S, and then displays OFF to enter the shutdown state.